TECHNICS_SX-GA3_SX-GA1.jpg

Technics GA3 & GA1

What makes a musical masterpiece? No less than an artful harmony of form, function and sound. Technics electronic organs are just that rare combination. Every curve, every line expresses the most discerning taste. Every feature and function offers tremendous musical potential and is designed for ease of operation. And the sound: rich and vibrant with incomparable realism. Technics advanced digital technology and a total dedication to musical excellence are the reasons why. Don't be surprised to find yourself making masterpieces.

 
 

The Wonders of Technics Sound

Technics calls it New Dynamic PCM sound. You'll call it as clear and spirited as real life

Technics uses stateof-the-art digital sound technology to sample their sounds, then delivers them with true-to-life realism - from upper and lower keyboards to bass pedals to the drums and rhythm percussion section.

And to make sure you're surrounded with deep, spacious sound, both the SX-GA1 and SX-GA3 feature high output power.

The World's Best-Loved Organ Sounds

Robust pipes, nostalgic drawbars, electronic organs, even the sounds of vintage organs from a bygone era.

Just touch a button and these sounds come to life with thrilling New Dynamic PCM vitality.

Select from 10 Organ Types with the SX-GA3 and 6 with the SX-GA1.

Technics GA3 Video

Technics GA3 Organ

Technics GA3 & GA1 Downloads

Technics GA3 & GA1: Styles Downloads

GA3 & GA1 Styles Series Y2

Technics GA3 & GA1 Styles: Series Y2 - FREE GA3 & GA1 Styles from Yamaha Tyros 3

[VIP] Summer Styles Series

Floppy Disk Files for F100 G100 GA3 GA1 EA5

[VIP] MIDI Collections

Floppy Disk Files for KN7000 KN6500 KN6000 KN5000 KN3500 KN3000 KN2600 KN2400 KN2000 KN1600 KN1500 KN1400 KN1200 KN1000 KN930 KN920 KN901 KN750 PR804 PR604 PR54 PR53 PR52 PR51 PR903 PR703 PR603 PR902 PR702 PR602 PR900 PR600 PR500 GA3 GA1 EA5 WSA1 & All MIDI Instruments

Technics Organs Forum

All Technics Organs questions and conversations. Click on 'Start Discussion' to make a new topic.
Topic Original Post Last Post Views Replies
minirecky

Dead keys on keyboard unless plugged in with headphones

minirecky on
October 20, 2018 at
11:37 AM
minirecky on
October 20, 2018 at
11:37 AM
6 0
BratschenFan

PX111 available for parts

BratschenFan on
March 12, 2018 at
5:45 AM
mvreijn on
October 1, 2018 at
10:16 AM
698 3
coffeesnob

PR50 assembly

coffeesnob on
August 30, 2018 at
12:11 PM
jd5live on
August 30, 2018 at
9:53 PM
171 1
spadekevin

Any thoughts please?

spadekevin on
July 23, 2018 at
2:22 PM
jd5live on
July 23, 2018 at
3:11 PM
266 1
spadekevin

Any ideas on what the problem might be?

spadekevin on
July 23, 2018 at
2:31 PM
spadekevin on
July 23, 2018 at
2:31 PM
243 0
spadekevin

Any ideas on what the problem might be?

spadekevin on
July 23, 2018 at
2:28 PM
spadekevin on
July 23, 2018 at
2:28 PM
205 0
spadekevin

Any ideas on what the problem might be?

spadekevin on
July 23, 2018 at
2:19 PM
spadekevin on
July 23, 2018 at
2:19 PM
215 0
mangalvar

Technics KN 2000 transformer dead

mangalvar on
July 4, 2018 at
3:11 AM
mangalvar on
July 4, 2018 at
3:11 AM
273 0
Organgrinder

SM AC 1200 Module Battery Replacement

Organgrinder on
June 24, 2018 at
7:58 AM
Organgrinder on
June 27, 2018 at
11:22 PM
414 7
mhanafi95

KN6000 Chord Modify Change

mhanafi95 on
May 20, 2018 at
8:44 AM
mhanafi95 on
May 20, 2018 at
8:44 AM
392 0
« Previous1234567Next »

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Technics SX EX 10L Power lead

Hi , Welcome to the site. I am sure from memory the power lead is a "figure of Eight " type, but to make sure can you send a photo of the socket in the back of the organ, in the meantime I will check with my friend (local dealer) to make sure. I know that…

Posted on October 3, 2018 at 3:48 PM

mandydickinson

mandydickinson
Total Posts: 1
Joined: October 2, 2018

Technics SX EX 10L Power lead

Can anybody let me know what kid of power lead this instrument has as it has been lost. Is there a transponder on the lead or is it just a cable. I cannot find anything out from the technics website and do not want to blow up the instrument by finding a…

Posted on October 2, 2018 at 2:28 PM

Olivier

Olivier
Total Posts: 2
Joined: May 29, 2018

Re: Looking for docs

Thank you,

I think that will at least improve my english....

Posted on May 30, 2018 at 2:00 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Looking for docs

Hi Olivier, I have attached a copy of the owners manual. Unfortunately, the only copy I have is in English, the original book was produced in 3 or 4 languages in the one book. I hope this one helps. and if you have any questions please contact us and we w…

Posted on May 30, 2018 at 1:45 PM

Olivier

Olivier
Total Posts: 2
Joined: May 29, 2018

Looking for docs

Hello,

Does someone have the manuals for Technics Organ Sound EX10 L?

It will be great if you have it in French....

Thank you for your help.

Posted on May 30, 2018 at 8:41 AM

01pearce

01pearce
Total Posts: 1
Joined: May 4, 2018

Service Manual for Technics SX-U90

I am seeking out a service manual for a Technics U90 series organ. I had a power supply problem and got a tech to have a llok at it & he removed the whole power supply unit. and never brought it back despite several attempts to contact him. I have sinc…

Posted on May 7, 2018 at 8:23 AM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Style Disks for SX-FA1

Hi Ken, Now we have Easter out of the way, I will draw up a quick guide on how to use these styles in your instrument over the next few days so please bear with me. I will start with the Yamaha styles. The FA uses much of the same operating system as the …

Posted on April 4, 2018 at 1:15 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Style Disks for SX-FA1

Hi John,

Forgive my ignorance. I tried to find any manual or directions on using the style disks. Do you happen to know of a manual that will tell me how to use them?

Thanks again,

Ken

Posted on March 29, 2018 at 2:49 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Style Disks for SX-FA1

Thank you John,

I look forward to giving these a shot.

Best Regards,

Ken

Posted on March 28, 2018 at 6:39 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Style Disks for SX-FA1

Hi Ken,If you check on the site for GA1/3 you will find these files should load into the FA1 as it is the full keyboard version of the GA series, when downloading the styles make sure you take each folder and open it before you transfer the contents to a…

Posted on March 28, 2018 at 4:39 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Style Disks for SX-FA1

Good Day,

I was hoping to find a free style disk just to see how they work. Does anyone have a link to one by chance? I will help me decide on whether or not it makes sense to purchase some.

Thank you in advance,

Ken

Posted on March 27, 2018 at 2:17 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

Hi there

Thats a really good result. Glad it worked for you! I would think an average external power unit should give you around 2 years life if it is permanently plugged into the mains but if it is switched through the organ mains switch it may well l…

Posted on March 19, 2018 at 4:52 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi Dave,

I purchased a small 3 Amp 5 volt Switching Power supply for it, and everything appears to be working now. All pedals as well.

I just want to say a quick thank you to you again. Without your help, I would still be struggling with the organ,…

Posted on March 19, 2018 at 3:45 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi Dave,

I am actually only getting 4 volts out of the main board to the pedal cable. I am not sure if there is something else dropping the voltage, or is it just because I may not have a strong enough power supply.

Posted on March 7, 2018 at 8:38 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

There is a 100uf 6volt capacitor across the 5 volt supply in the pedal unit. If this is starting to get a bit tired the voltage drop down the cable increases such that the voltage at the ic2 processor on the pedals is then low. I would suggest you change …

Posted on March 6, 2018 at 5:42 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

For those following along. smiling

So far, I have found there is another processor board in the bass pedal cabinet. I am only seeing 4 volts getting to the board, so I am not sure if that is enough to power it. Will go back to the main board and see if I ca…

Posted on March 6, 2018 at 4:24 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

I love a challenge so I will probably at some point repair it, but I need to get a new soldering iron.

I did find one ither issue now that I am going to have to try to figure out. All the pedals on the bottom don't work.. any thoughts on this.

Gott…

Posted on March 4, 2018 at 3:05 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

Hi Ken

That's good news. Its always difficult to do remote diagnostics as there are so many variables involved! Are you going to keep the external power solution or repair the on board circuit? I think it is totally acceptable to fit a permanent extern…

Posted on March 4, 2018 at 10:14 AM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi Dave,

I went ahead and did a little more troublshooting. For some reason when I checked Power to Ground with an ohm meter, I was getting a short. I removed the diode and plugged in an external power supply and low and behold!!

I have a working SX…

Posted on March 3, 2018 at 8:58 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Perfect, I will give this a shot this weekend.

You are just absolutely amazing with your knowledge of this organ.

Thanks for being patient and extremely helpful.

Best Regards,

Ken

Posted on February 23, 2018 at 5:31 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

On a standard 24 pin output of a power supply the important ones are as follows:
You need to use the +5 volt from the power supply (three reds next to each other just pick one) and the 0v blacks (three next to each other the other side of the white wire)…

Posted on February 22, 2018 at 9:09 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi David,

Can I put the ground of the computer power supply to the aluminum foil on the inside of the organ, or should it be placed somewhere else?

Thanks,

Ken

Posted on February 22, 2018 at 5:07 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Ahh,

Good idea. I am going to wait for the parts as they will be here maybe by the weekend. If that fails, I will take the Power Supply approach, and from what I am gathering remove the components that I have just replaced. The Diode I think you are re…

Posted on February 21, 2018 at 9:48 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

The power supply is pretty straight forward being a free running switch mode psu with a simple comparator and voltage reference circuit to keep it in check. The alternative is to get a 3 amp 5volt external supply, remove the components to isolate the circ…

Posted on February 21, 2018 at 8:40 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Thank you,

I am going to replace both and hope that this helps. I am really hoping this will work. I am dying to play this organ.

Thank you!

Ken

Posted on February 21, 2018 at 8:29 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

I just ordered both. I figured they aren't that expensive.

Thank you again. I'll keep you posted.

Just out of curiosity, if this doesn't fix it, do you think you might be able to do more, or is this basically what you would have done at this point?

Posted on February 21, 2018 at 8:15 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

They are fast ones yes. You need something like a UR5408 which will work. This is a standard high speed diode which is probably faster than necessary but to find a Panasonic original is pretty difficult.

You can read the diode with a meter but it need…

Posted on February 21, 2018 at 8:14 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Sorry,

Just went back to the specs on both diodes and they both appear to be fast diodes, do you know which one it might be?

I have attached a snapshot of the schematics.

Posted on February 21, 2018 at 7:22 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

I should be able to measure that with an Ohm meter, correct. If so, it looks like it is open. I get nothing across it either way.

Do you think the board has been destroyed at this point? I am just wondering if I should be trying to find the illusive Ma…

Posted on February 21, 2018 at 7:17 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

If the fast diode is open circuit then there will be nice spikes of voltage across the capacitor and that will do it no end of damage. It also won't do the rest of the circuitry any favours! Check it out of circuit to ensure its good but I would replace …

Posted on February 21, 2018 at 6:51 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi Dave,

I finally got the parts and installed them in the main board. I am still getting a hot resistor, but also the 1000uf cap is getting hot. Is it possible that one of the diodes D7 or D9? Cant make it out in the plan be bad?

Any insight would …

Posted on February 21, 2018 at 6:39 PM

kwaller896

kwaller896
Total Posts: 1
Joined: February 10, 2018

Re: Technics SX-FA1 Completely dead

I have a Technics FA1 that is completely dead except for the power lamp and control panel lamps. I opened it up and found that the 6.8 ohm resistors on the power board were both open so I replaced them. When I powered it on they both overheated and blew…

Posted on February 10, 2018 at 8:21 AM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Understood. I don't think I am going to see anything just yet. The 6.8 Ohm resistor is bad.

Anxiously awaiting the parts. They were difficult to find!

Thanks,

Ken

Posted on February 7, 2018 at 3:19 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

35volts AC once rectified produces around 50volts DC which is normal. On load this drops a bit but not that much. Whenever you measure AC at a transformer the DC volts will be around 1.4x that voltage off load. There isn't an easy place to measure the DC …

Posted on February 7, 2018 at 8:23 AM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi Dave,

While I am waiting for some of the replacement parts, I was trying a few more checks with the Power Supply. The output I have from the transformer is only 35 Volts. Not sure if that is a 110 / 220 volt thing based on where you personally are l…

Posted on February 7, 2018 at 2:30 AM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

Fans should kick once when the power goes on and then stop. They are driven from a transistor on the center of the power amp board which in turn takes a feed from a thermistor on the heatsink. It is not actually a good circuit as there is far too much hea…

Posted on February 1, 2018 at 3:13 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi Dave,

Thank you!!!

I am going to replace all the components you nentioned above.

One thing I do notice as you mentioned the fans, they do not turn on when the power is on. Is that something that is controlled by the Main Board one we have powe…

Posted on February 1, 2018 at 2:43 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

The display and all the voicing runs at 5 and 3.3volt derived from a 42 volt positive supply from the power amp board via a 6.8 ohm resistor that sits to the bottom left hand corner of the power amp / heat sink board. The important thing is that this resi…

Posted on February 1, 2018 at 1:03 PM

kderector

kderector
Total Posts: 20
Joined: September 6, 2016

Re: Technics SX-FA1 no load. Blue screen.

Hi Dave,

I know this post is almost a year old, but I have an SX-FA1 that is dead. There is 15 and - 15 volts to the main board, but not much more than that. Is it possible for this to have completey failed and this may resolve my issue?

Hi Hope you…

Posted on February 1, 2018 at 12:31 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Battery for the GA3

There are two batteries soldered to the main voice board on the GA3. This is a generic board that is very similar to others in the range but the power supply and the batteries are the same in all of the models from that range.

You need to lift the top…

Posted on December 16, 2017 at 6:20 PM

kiaya611

kiaya611
Total Posts: 5
Joined: December 7, 2017

Battery for the GA3

I recently got a GA3 and I wanted to know where the battery is that keeps the memory when it is unplugged. I have looked in the service manual and online and found nothing. I wanted to replace it before it might be necessary because I have heard horror …

Posted on December 16, 2017 at 2:41 AM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Fixing Technic U60 organ

These were made over 25 years ago they are only available as scrap or at least EBay items and are likely all to be past their best. You will not find a good one easily.I have an E60 which is similar but to an extent better in that it has better multi timb…

Posted on September 17, 2017 at 10:21 PM

smatemba

smatemba
Total Posts: 7
Joined: August 25, 2017

Buying technic U60 organ

Hello, l want to buy technic U60 organs, where can l get them . Do you any suppliers or store s. I will pay for shipment.

Posted on September 12, 2017 at 10:10 AM

smatemba

smatemba
Total Posts: 7
Joined: August 25, 2017

Buying technic U60 organ

Hi, l want to buy technic U60 organs. Can you suggest places or stores to buy. I will need to ship them to Tanzania.

Posted on September 12, 2017 at 9:12 AM

smatemba

smatemba
Total Posts: 7
Joined: August 25, 2017

Re: Buying Technic U60 organ

Hello. I want to buy technic U60 organ , are there any specific stores l can order. I am in Tanzania.

Posted on September 12, 2017 at 9:03 AM

smatemba

smatemba
Total Posts: 7
Joined: August 25, 2017

Re: Fixing Technic U60 organ

Thanks

Posted on September 12, 2017 at 8:56 AM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Fixing Technic U60 organ

The U60 organ has simple metal strip and wire key contacts.
I use servisol switch cleaner, just a little squirt, on each contact which seems to make things better. If you lift the keyboards you will see that the copper coated steel strips act on a plast…

Posted on September 8, 2017 at 2:34 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Fixing Technic U60 organ

I am off to see a U60 on Friday morning with the same fault. It will allow me to have a look over one of these organs and give some idea of what might correct the fault. I will report back then!

Posted on September 6, 2017 at 8:01 PM

Stevehdj

Stevehdj
Total Posts: 12
Joined: October 26, 2014

Re: Adding styles and style parts for Technics SXGA3

Hi John

Thanks for the reply. I have to agree that for the most part the GA/FA/F stlyes are probably within 95% of each other but also would think that there would be a few differences. I have some EA styles converted for the GA which are different t…

Posted on September 3, 2017 at 1:27 AM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Adding styles and style parts for Technics SXGA3

Hi Steve, Let's take your topics as they come:-
Firstly your question regarding extra styles, the GA, FA and G/F100 models all have the same set of styles and as they were derived from the KN2000. The composer section has a capacity of 8600 notes (or ev…

Posted on September 2, 2017 at 9:42 PM

Stevehdj

Stevehdj
Total Posts: 12
Joined: October 26, 2014

Adding styles and style parts for Technics SXGA3

I have a couple questions regarding SXGA3

1. Is there any place one can download styles from other Technics organs to supplement those on the GA3. I expect there are different styles contained within the FA and other GA series which would compatible w…

Posted on September 2, 2017 at 11:30 AM

smatemba

smatemba
Total Posts: 7
Joined: August 25, 2017

Re: Fixing Technic U60 organ

Thanks for feedback. However its not that keys are stuck but the problem is they are not giving out tones when pressed or played. Some keys are silent when played or pressed.

Posted on August 29, 2017 at 12:55 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Fixing Technic U60 organ

Hi, may I welcome you to the site. the service manual for the U60 is unfortunately not yet in the archive, as you can imagine there is a very large quantity of manuals to obtain. You refer to the fact that you have "jam keys " from this I would assume the…

Posted on August 29, 2017 at 12:03 AM

smatemba

smatemba
Total Posts: 7
Joined: August 25, 2017

Fixing Technic U60 organ

Hello, I am interested to know how to fix "jam keys" for technic U60 organ?

Posted on August 26, 2017 at 10:58 AM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: U50 - all E and B Flat keys/pedals have stopped working

The U50 is a bit of a beast when it goes wrong. I have scrapped many of them along with the later models with similar internal design as they have so many issues once opened that they are not really a cost effective repair. The keyboards and rhythm and au…

Posted on May 1, 2017 at 10:56 PM

derrick

derrick
Total Posts: 7
Joined: April 25, 2016

GA3. Organ.sound.

Derrick. Can anyone tell me if it is possible to get the well known sound of Klaus Wunderlich on the GA3 organ.
If anyone has done this would you please let me know of the settings, I have been trying for a long while now
and I am no further on, I can…

Posted on April 17, 2017 at 4:55 PM

manu01420

manu01420
Total Posts: 5
Joined: February 26, 2017

Re: ex sx 70

hello Dave
avez vous trouve la carte pour la photo?
merci encore
manu et bonne journee
have you find the picture?
regards
manu

Posted on April 16, 2017 at 2:39 PM

Nikki1972

Nikki1972
Total Posts: 1
Joined: April 11, 2017

U50 - all E and B Flat keys/pedals have stopped working

All of the E and B Flat keys and pedals have suddenly stopped working on my Technics U50. Has anyone had this before or be able to suggest what might be the cause?

Thank you.

Posted on April 11, 2017 at 10:20 PM

paulyp39

paulyp39
Total Posts: 3
Joined: August 23, 2015

Re: GX7/ C800 blank floppy disks

Mike,

Thank you for the very comprehensive answer. Following your advice I have found an old DS DD disk at work which I have been able to format in the C800 drive. All is working as expected which was a major surprise seeming the instrument is over 28 …

Posted on March 9, 2017 at 7:47 PM

activik

activik
Total Posts: 2
Joined: February 3, 2016

Re: Technics SX-FA1 no load. Blue screen.

The fault is usually on the main voice board where the standard Panasonic simple switch power supply lives. You will need to swap out the capacitors associated with the power supply as well as the three transistors including the one on the heat sink. In w…

Posted on March 9, 2017 at 2:24 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GX7/ C800 blank floppy disks

Paul,

I'm not a complete expert on this so hopefully some other Members will chime in and add to this post or correct me. I'm going to pretend I know what I'm talking about anyway and explain to the best of my belief, hope it helps.

C800 (a great in…

Posted on March 8, 2017 at 10:58 PM

paulyp39

paulyp39
Total Posts: 3
Joined: August 23, 2015

GX7/ C800 blank floppy disks

Hi just acquired a C800 (portable version of the GX7), and wondered if anyone knew if you can still get hold of blank floppy disks to use with the integral floppy drive (SY-FD3) or if anyone had a few unwanted disks. I believe the media used are 3.5" sing…

Posted on March 8, 2017 at 9:12 PM

manu01420

manu01420
Total Posts: 5
Joined: February 26, 2017

Re: ex sx 70

bonjour
je suis tres heureux de votre recherche et merci pour votre peine
i am very enjoy and thank you very much.
manu

Posted on March 1, 2017 at 6:05 AM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: ex sx 70

I think I have a scrap mother board with the ultra capacitors still on it in my workshop. I will put a picture of it up on the site tomorrow. The 70 is a derivative of the 66 and uses the same motherboard and plug in PCM technology so they are I believe f…

Posted on February 28, 2017 at 8:44 PM

manu01420

manu01420
Total Posts: 5
Joined: February 26, 2017

Re: ex sx 70

hello
if you have a picture or a schema, i m very enjoy
again thank you
manu

Posted on February 28, 2017 at 3:09 PM

manu01420

manu01420
Total Posts: 5
Joined: February 26, 2017

Re: ex sx 70

merci pour votre reponse c est deja tres gentil a bientot Dave Tutt
thank you for your answer
manu01420

Posted on February 28, 2017 at 10:32 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: Technics SX-FA1 no load. Blue screen.

I've sold both keyboard and GA3 awhile back.

Posted on February 27, 2017 at 11:41 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: Technics SX-FA1 no load. Blue screen.

The fault is usually on the main voice board where the standard Panasonic simple switch power supply lives. You will need to swap out the capacitors associated with the power supply as well as the three transistors including the one on the heat sink. In w…

Posted on February 27, 2017 at 10:38 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: ex sx 70

You probably need replacement ultra capacitors. With this model there are three of them on the card frame motherboard. You will need all three replaced. They are 10F 2.3v types and are available from many electronic component suppliers. However, I would a…

Posted on February 27, 2017 at 10:31 PM

manu01420

manu01420
Total Posts: 5
Joined: February 26, 2017

ex sx 70

hello has all and all
I am in France and I am very happy D being come on this site by Audiokeys.
J have an organ sx ex 70 and it loses its memories has each stop
can you tell me or is the pile memory? or m to send a shema of the map or is L accumulator…

Posted on February 27, 2017 at 6:27 AM

Stevehdj

Stevehdj
Total Posts: 12
Joined: October 26, 2014

Re: Using KN2000 styles with GA3 organ

Thanks for the added info MIke I will do a bit more research, I do see the cost of the software to be a bit steep for my taste but if I do follow through and have successful conversions I will be sure to share with the site.

Regards

Steve

Posted on October 17, 2016 at 1:08 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Using KN2000 styles with GA3 organ

Hi Steve,

It's not as complicated as that. In Styleworks you set your target keyboard to KN2000 and then select the GA3 dropdown option.

From there, you can convert any Style to GA3. All of the GA3 Styles available on this site are done in that way.…

Posted on October 16, 2016 at 4:47 AM

Stevehdj

Stevehdj
Total Posts: 12
Joined: October 26, 2014

Re: Using KN2000 styles with GA3 organ

Hi John

Thanks for reply, I did get the message below from Eric at style works and your interpretation seems to follow along as they describe the GA3 as a subset. I have no experience with style works program but was thinking - What if one converted f…

Posted on October 16, 2016 at 2:12 AM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Using KN2000 styles with GA3 organ

Hi Steve, Just to let you know we are looking into this, style works is great but I set up the scenario you asked about, however in style works there seems to be a conflict of formats. This is because both the KN2000 and GA3 are in the same menu . We are …

Posted on October 15, 2016 at 9:29 PM

Stevehdj

Stevehdj
Total Posts: 12
Joined: October 26, 2014

Using KN2000 styles with GA3 organ

I have acquired several style disks for the KN2000 which is of similar era of the GA3. Does anyone know if it is possible to convert the KN2000 files to be able to be used with a GA3. My assumption is that the EMC styleworks software may allow this but …

Posted on October 15, 2016 at 8:31 AM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: EX35 organ

Hi Derrick

I know what you mean! My mum is 84 with dementia which means I get less time for repairs some weeks than I really need!
By all means if you want to bring it back to normality then I am happy to repair the board if you remove it and ship it…

Posted on September 6, 2016 at 11:20 PM

derrick

derrick
Total Posts: 7
Joined: April 25, 2016

Re: EX35 organ

Hello Dave, Many thanks for your very quick reply, re the ex35 problem.
I am sure you have hit the nail right on top of it's head
You are correct the organ has no earthing system, and it is getting on a bit alot like myself
being 85 years and not sei…

Posted on September 6, 2016 at 4:06 PM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: EX35 organ

Hi Derrick

I'm sure someone here will correct me if I am wrong but I have a feeling the ex35 is of similar internal construction as the 66 from a similar age .... 1986 or so with a card frame to the left rear of the instrument containing all the digita…

Posted on September 5, 2016 at 10:14 PM

derrick

derrick
Total Posts: 7
Joined: April 25, 2016

EX35 organ

my second organ has developed a fault every thing works as it should but when I switch on now the Leds light up
then a second after a load buss or humming comes on all of the time.
Every thing still works .The noise sounds like a solanoid or a conta…

Posted on September 5, 2016 at 4:15 PM

Fergie

Fergie
Total Posts: 2
Joined: June 11, 2016

Re: Technics GA2 Organ - Thumb Pistons

Hi John

Problem solved! Thank you so much for the clear instruction. I was thinking there must be some way of disabling the rhythms from the pistons. I used to have a Yamaha EL90 and was looking for a 'disable' button or switch somewhere. I've now f…

Posted on June 29, 2016 at 12:36 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Technics GA2 Organ - Thumb Pistons

Hi, Welcome to the site, Lets see if we can sort out your enquiry. The Registration pistons operate in two modes "Normal" and "Expand" This is accessed in the "Memory and Control" menu. In Normal mode your registration is stored by voice and volume, when…

Posted on June 29, 2016 at 1:05 AM

Fergie

Fergie
Total Posts: 2
Joined: June 11, 2016

Technics GA2 Organ - Thumb Pistons

Hi Folks. This is my first post here.
I'm a professional organist and have recently aquired a mint condition GA2 organ and I need to find a way to disable the rhythms from the thumb pistons. I cannot find any information in the owners manual and I'm st…

Posted on June 28, 2016 at 8:25 AM

davetutt

davetutt
Total Posts: 160
Joined: January 12, 2015

Re: GA3 about 20 years old - need advice

Hi there

The USB and memory stick solution can be rather troublesome. Having tried it on a number of machines it was more trouble than it is worth. The USB hardware usually imposes a formatting regime on the memory stick which can result in it being un…

Posted on June 27, 2016 at 11:45 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: GA3 about 20 years old - need advice

Hi Pam, the emulator stores the files in sets of 20 not unlike the SD card used in the KN7000 keyboard, thus giving you the equivalent of 99 discs that means 1980 file sets. on one USB stick/drive. you will need some software to transfer your Discs to USB…

Posted on June 22, 2016 at 7:18 PM

2975martin

2975martin
Total Posts: 3
Joined: March 11, 2016

Re: GA3 about 20 years old - need advice

Great tip about using the format command. I am going to try that sometime this week.

I have been asked about switching it over to a USB drive. That would be fine; however, my question then is this: Unless I have been told incorrectly the GA3 allows on…

Posted on June 22, 2016 at 1:36 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: GA3 about 20 years old - need advice

Hi, It's that mad Englishman again, To get the cleaning floppy to work I suggest you inst the disc and ask the drive to format it, This will spin up the disc as it tries to find magnetic material to format, you will get an error but at least the disc will…

Posted on June 22, 2016 at 1:18 PM

2975martin

2975martin
Total Posts: 3
Joined: March 11, 2016

Re: GA3 about 20 years old - need advice

Thanks for the quick reply!

1) I have a cleaner as you suggested. I have used it. Should I run this more often? How does it run exactly since this drive will only accept a limited number of file types. If I remember from the last time a used it I could…

Posted on June 22, 2016 at 2:07 AM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: GA3 about 20 years old - need advice

Hi, thank you for your enquiry, lets take your problem one step at a time
1) your drive is as you say is about 20 years old your drive may well have had little or no maintenance, most people unfortunately do not service such items (don't feel too bad a…

Posted on June 21, 2016 at 11:50 PM

2975martin

2975martin
Total Posts: 3
Joined: March 11, 2016

GA3 about 20 years old - need advice

Our church (Louisiana, USA) purchased a GA3 organ about 20 years ago. It has performed beautifully for all these years. In the earlier years I played on the instrument about 6 hours/week. I have played and saved hundreds of hymns and songs creating a vast…

Posted on June 21, 2016 at 7:02 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Technics format conversion for Audio CD on sx-GA1

Hi lostinthefort,

Your only way to get a 'correct' recording of the Songs is my loading them and recording them from the instrument itself.

Whilst it might be possible to convert to midi using the organ, playback will not sound the same on other ins…

Posted on March 13, 2016 at 12:56 AM

lostinthefort

lostinthefort
Total Posts: 1
Joined: March 11, 2016

Technics format conversion for Audio CD on sx-GA1

I have a friend who’s grandmother had several disks of music she recorded of herself playing. The grandmother recently passed and they want to sell the organ (sx-GA1), but want the music pulled off the floppy disks and put on an Audio CD if possible. Th…

Posted on March 11, 2016 at 7:51 PM

RichardH

RichardH
Total Posts: 1
Joined: February 10, 2015

Re: Dimensions + weight GA-series

Hi guys just got a beautiful G100c last night in mint condition. Moving these awesome pieces of kit requires either 2 world class weightlifters with the stealth and poise of a Ballerina to avoid knocking them on door frames or, you disassemble (as I shoul…

Posted on February 27, 2016 at 9:29 AM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Dimensions + weight GA-series

hi Olli, If you are looking for the "WORKS" how about the G100c the sizes are approx 125 cm W x 128 cm H x 69 cm D 113kg weight, or the F100 if you are looking for 61 note keyboards but a lot bigger and heaver !!
Regards John.

Posted on February 25, 2016 at 6:28 PM

Olli_HH

Olli_HH
Total Posts: 3
Joined: February 16, 2016

Re: Dimensions + weight GA-series

Hi John,

Thanks a lot for this interesting advice and I just had a look at YouTube what the EA5 is about.
Seems to be a decent instrument but ... I need to go for the "full monty".

You know ... started playing organ again (did this on a professiona…

Posted on February 24, 2016 at 7:38 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Dimensions + weight GA-series

Hi Olli,

As far as size is concerned you could also look at the EA5, this is a more modern version, I remember the GN9 well I had one, but now use a KN7000 this is due to weight !! but the option of GA and EA would give you a better chance …

Posted on February 24, 2016 at 2:24 PM

Olli_HH

Olli_HH
Total Posts: 3
Joined: February 16, 2016

Re: Dimensions + weight GA-series

Hi John,

great stuff and thanks for investigation (did you wink)?
This is very helpful and it seems that the weight can be neglected comparing to the GN 9 organ which I carried into the 5th floor of my flat (of course no elevator).

So the next chall…

Posted on February 24, 2016 at 8:44 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Dimensions + weight GA-series

Well done Mr Ferret!!! I looked yesterday and couldn't find the info ;)

Posted on February 23, 2016 at 7:27 PM

jd5live

jd5live
Total Posts: 320
Joined: June 8, 2014

Re: Dimensions + weight GA-series

Hi Olli,
Welcome to the site, I have been able to get the specifications I think you require,

Technics GN9 Technics GA1

124.5 cm 124.…

Posted on February 23, 2016 at 2:22 PM

Olli_HH

Olli_HH
Total Posts: 3
Joined: February 16, 2016

Dimensions + weight GA-series

Hi guys from a quite new member.

I was wondering whether one of you can help me out with some specifications of the GA-series organs (especially for the GA2 and GA3).

Currently playing a GN9 but considering to switch on one of those models mentioned…

Posted on February 22, 2016 at 6:24 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: Technics SX-FA1 no load. Blue screen.

Where it says at the bottom: ALL PDF'S

Type in: FA1

You'll see two pdf's

TECHNICS SX-FA1 REFERENCE GUIDE pdf and
TECHNICS SX-FA1 SERVICE MANUAL pdf

Posted on February 17, 2016 at 10:59 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: Technics SX-FA1 no load. Blue screen.

Did you check here:

http://members.technicskeyboards.com/files/pdf-documents/

There is an owners manual and service manual both

Posted on February 17, 2016 at 10:56 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: Technics SX-FA1 no load. Blue screen.

[b]Hello-
Have you looked up the manuals here? Mike is pretty good about posting most and will post any that is needed.
Secondly, if you have a solid blue screen...you're not going to want to hear this, the organ is probably done for. Unfortuanely, unle…

Posted on February 17, 2016 at 10:51 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

GA3 MIDI Connect

[b]Alright. I've given up trying MIDI with the KN5000. In fact, interested in selling it.

I'm seeking help in connecting MIDI to my GA3. I have sound cord and sound is playing through the organ from the computer. I have Miditzer running on PC Windows 8…

Posted on February 17, 2016 at 10:47 PM

activik

activik
Total Posts: 2
Joined: February 3, 2016

Technics SX-FA1 no load. Blue screen.

Hello dear friends, I hope somebody will help.
I am engaged in repair of musical instruments for over 5 years, this is my hobby. I have a Technics SX-FA1 he can't boot. When I press on the keys there is no sound. Programs are not switched. I can not find…

Posted on February 4, 2016 at 2:40 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

Well...its done and seems to work. I actually just swapped sides on same manual. I dont mind telling....not only was that work.....THAT scared the bloody hell out of me! smiling Never,...have I done anything like that before. WOW! smiling Ok...clean up and play …

Posted on January 16, 2016 at 3:41 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

JESUS Mike!
Wish you were a call away. I have both manuals off. BOTH are dirty AND sticky! Can I use "air in a can" to get dirt and dust off?
I suppose those rubbers are actually on the green and tan circuit boards...right? sad

Posted on January 16, 2016 at 1:48 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

OH! Ok. SERVICE manual. Yah, didn't have that given to me. I'll go get it on the page. DUH! smiling
Thanks again

Posted on January 16, 2016 at 1:07 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GA3 Problem

Not that I know of.

Make sure you're looking at the Service Manual, not the regular user manual.

Keep it dust-free and don't be tempted to touch any of the graphite parts of any of the contacts. Swap as cleanly as you can without touching anything d…

Posted on January 16, 2016 at 1:04 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

Last question.....
Is there a youtube or set of directions, ( i looked in the manual) on how to take this organ apart?

Posted on January 16, 2016 at 12:57 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

[b]Alright Mike.
I'll give it a go this evening. Graphite huh? Same stuff pencils are made with? I saw for a fleeting moment something on YouTube, about that.
But,I'll just swap a bottom out for a top. The section is the second B, in from the last key. …

Posted on January 16, 2016 at 12:33 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GA3 Problem

Almost certainly. The rubber pads have two rubber contacts. I believe it is some type of graphite on the end of the two rubber 'prongs'.

One is longer than the other. When you press a key, the long one makes contact with the circuit board, rapidly foll…

Posted on January 15, 2016 at 11:31 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

Oh..and luckily, the last owner did have the manuals. I lucked out there smiling

Posted on January 15, 2016 at 11:23 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

You Sir...would be correct smiling
In saying that, turning it OFF..did "fix" the issue. My follow up is this....is this then, still a rubber pad issue you think?

Posted on January 15, 2016 at 11:14 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GA3 Problem

Hi Dennis,

Probably loading a floppy disk is turning your touch sensitivity on, or increasing it, due to the settings on the disk. Just a guess.

Mike

Posted on January 15, 2016 at 10:54 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GA3 Problem

[b]Hey Mike-
BRILLIANT suggestion about swapping!! smiling THANK YOU.
I'll have to try the sensitivity setting too. See if it's turned off smiling It's just...odd..it only happens when I place a floppy disc in and load.
A wee bit afraid of taking things apart…

Posted on January 15, 2016 at 10:43 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GA3 Problem

This is almost certainly a defective contact. I haven't had any success in cleaning contacts but there are some Youtube videos describing the cleaning of rubber contacts on other keyboards. As I say, it has never worked for me.

You can establish whethe…

Posted on January 15, 2016 at 10:06 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

GA3 Problem

[b]So, I've had my GA3 for two weeks now. When I got it, I notice the SECOND "B" key from the end, was playing louder than the rest of all the keys, top or bottom.
It was annoying and I read the manual and found how to reset the organ to original setting…

Posted on January 15, 2016 at 7:48 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: Top of the line Model

[b]To be honest, I WAS wondering about my GA3. I know this is the model that John Bowdler plays in your next of the woods over there. By the way, I LOVE hearing him play and watching the YouTubes. I guess I was curious about this model. I DO have another …

Posted on January 15, 2016 at 7:39 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Top of the line Model

It was the G100C in Europe, built in 1996. Model numbers sometimes varied in different markets. I think the same model was F100 elsewhere, though the F100 possibly had more bass pedals.

EA5 was the next to last model made in 1995. However, the GA3 from…

Posted on January 14, 2016 at 7:02 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Top of the line Model

I was just curios, what was the top of the line model, with the most fully loaded, full features, options and "bells and whistles" for the organs?

Posted on January 14, 2016 at 3:53 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GN3

OH WOOOOOOOW! I think I'll be having fun looking into all this now. smiling
Thanks so much Mike for the info! smiling

Posted on January 5, 2016 at 12:49 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GN3

Well, in brief, MidiTzer is the sound of a Wurlitzer in a computer program. You'll appreciate that you can hook up any MIDI organ to a computer and that it can then control 'virtual instruments'. Some of these instruments are quite astonishing in quality.…

Posted on January 5, 2016 at 12:36 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GN3

[b]Haha..no problem. the person I got the info from initially told me SX-DN3. I looked on the site here and said to myself, there is no DN3 or DN anything. Hahaha. I figured the guy meant GN3.

Yah, I have a Thomas Californian spinet that was my Grandmo…

Posted on January 5, 2016 at 12:25 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GN3

No problem. I misread GN3 as GA3.

It might also be worth you looking at a virtual instrument such as Miditzer and hooking that up to an existing organ.

I can't help you much with other brands... I try not to look at them! I can't afford to start lik…

Posted on January 5, 2016 at 12:15 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GN3

[b]Alright. Thanks Mike! That's what I needed to know or rather, confirmed. I was looking at one today but A) realized there were only 39 keys and B) there are specific sounds I'm looking for. I rescinded a bit a Ebay this morning for a FA1!. I HATED doin…

Posted on January 5, 2016 at 12:03 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GN3

Ahhh ok. Well I know the GNs fairly well. I would say you can get theatrish sounds out of them but they aren't really geared for that. Yes, to playing in the style of a theatre organ, sounds reasonable. No, to having plenty of specific theatre organ sound…

Posted on January 4, 2016 at 11:55 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: GN3

Hey Mike-
I actually meant...GN3. I know the GA series smiling GN..not familiar with.

Posted on January 4, 2016 at 11:45 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: GN3

Hi CelticKnight,

Technics GA3 has theatre organ sounds. I haven't played this model myself so I'm not sure how they are accessed. Take a look on Youtube with a search for Technics GA3 Theatre Organ to find some examples. Try the same search with GA1 al…

Posted on January 4, 2016 at 11:40 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

GN3

I was wondering, if the SX GN3, had the theatre organ sounds in it? I've looked over both manuals but, the info in somewhat vague. I'm hoping someone could shed some light on this.
Thank you smiling

Posted on January 4, 2016 at 10:22 PM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: Service manual for G7

Great smiling
HAPPY NEW YEARS!

Posted on January 1, 2016 at 11:51 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Service manual for G7

HI, yes the G7 Service Manual and User Manual were put in the Members Area at the time. They are on the "All PDFs" search page.

Posted on January 1, 2016 at 11:33 AM

CelticKnight

CelticKnight
Total Posts: 74
Joined: March 19, 2015

Re: Service manual for G7

Did you get it posted?

Posted on January 1, 2016 at 11:15 AM

Mocata

Mocata
Total Posts: 3
Joined: September 18, 2015

Re: TECHNICS PCM SOUND E22L USER/SERVICE MANUAL PDF

Thank you so much!

smiling

Posted on September 23, 2015 at 7:19 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: TECHNICS PCM SOUND E22L USER/SERVICE MANUAL PDF

Hi Mocata,

The Technics E22 Service Manual is now available in the Members Area.

Best wishes,
Mike

Posted on September 23, 2015 at 1:02 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: TECHNICS PCM SOUND E22L USER/SERVICE MANUAL PDF

Hi Mocata,

I don't have the Technics E22 User Manual yet but download the E18 User Manual which is very close to it:

http://members.technicskeyboards.com/instruments/e-series/

I'll add the sx-E22 Manual on that page when I get it.

I can get ho…

Posted on September 18, 2015 at 7:31 PM

Mocata

Mocata
Total Posts: 3
Joined: September 18, 2015

TECHNICS PCM SOUND E22L USER/SERVICE MANUAL PDF

Hi, I own a TECHNICS PCM SOUND E22L and I desperately need a printed or pdf version of the manual. Any idea where can I find it? Thanks!

Posted on September 18, 2015 at 2:53 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: SX-F100 REFERENCE GUIDE

Hi Sampa2

For the reference guide, use the GA3 Reference Guide which you will find to have all the info you need. The two organs are extremely similar. Hopefully an F100 owner will eventually share one with us.

For the Technics F100 Service Manual p…

Posted on May 29, 2015 at 6:48 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Service manual for G7

Hi, I'll be adding the Technics G7 Service Manual over the weekend.

Best wishes,
Mike

Posted on May 29, 2015 at 6:35 PM

sampa2

sampa2
Total Posts: 2
Joined: May 25, 2015

SX-F100 REFERENCE GUIDE

Hi
I am a new member of the group.smiling
I am looking for a reference guide for my SX-F100 organ
Any feed back would be of great help.
I have tried the web with out any luck.
thanks

Posted on May 29, 2015 at 4:43 PM

jfellows66

jfellows66
Total Posts: 2
Joined: May 26, 2015

Service manual for G7

Does anyone know where l can find a service manual for my SX G7 Technics Organ?

Posted on May 26, 2015 at 10:23 PM

jfellows66

jfellows66
Total Posts: 2
Joined: May 26, 2015

Service manual for G7

Does anyone know where l can find a service manual for my SX G7 Technics Organ?

Posted on May 26, 2015 at 10:22 PM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Technics EX35

Hi Graeme,

My EX35 is tucked away at the moment but I'll take a look in the next few days and get back to you.

I don't think I have the service manual yet. I'll be back in touch soon.

Best wishes,
Mike

Posted on April 30, 2015 at 6:32 PM

Graeme

Graeme
Total Posts: 1
Joined: April 28, 2015

Technics EX35

Only two buttons of the Voice Setting Computer work. LED 3 does not light and none of the other buttons/combinations will store voices. Does anyone know a fix for this and could you please add a pdf of the service manual to the Manuals List. Thanks.

Posted on April 28, 2015 at 2:41 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Technics EX60

I'm glad that worked for you!

The slot is for a Memory Pack. You can record on the EX60 as you probably know. The Memory Pack lets you store your performances. It's probably difficult to get one now. You can also get a Floppy Drive which can store perf…

Posted on February 16, 2015 at 12:59 AM

alan47

alan47
Total Posts: 2
Joined: January 5, 2015

Re: Technics EX60

Thank's Mike all working now did as was told so AOK all peddles working, here is another question what plugs in the slot to the right of the lower keyboard and where can I get it if it increases the range. Many thanks to all

Posted on February 16, 2015 at 12:28 AM

admin

admin
Total Posts: 1035
Joined: February 2, 2014

Re: Technics EX60

Hi Alan,

COMPLETELY DISCONNECT YOUR ORGAN FROM ANY POWER BEFORE YOU DO THIS AND ONLY DO IT IF YOU ABSOLUTELY KNOW YOU ARE SAFE!

I have an EX30 and have had problems getting the bass pedals working in the past. I've uploaded two pictures attached to …

Posted on January 20, 2015 at 7:47 PM

alan47

alan47
Total Posts: 2
Joined: January 5, 2015

Technics EX60

Hi there can any one say why the Bass pedles will not work on this model.
Many thanks Alan

Posted on January 20, 2015 at 2:01 PM